3 min read

Portable GPS Tracker Manual: GF10, G01, and G02

Description of Lights on Device

GSM signal status light:

Received GSM Signal: The light flashes once, then the light turns off.
Haven't Received GSM Signal: The light keeps flashing which means the device haven't read the SIM card properties.

Charging status light:

Full Battery: The light is constantly on which means it is fully charged.
Charging Battery: The light keeps flashing which means it is still charging.

Power ON/OFF

Insert a 2G GSM SIM card (micro size) with an active internet data service.

When inserting the SIM card, the device will turn on automatically, and vice versa. When you remove the SIM card, the device will turn off automatically.

Device Supports 3 Working Modes

When switching work modes, we recommend to do it through the Secumore1 application.

Real-Time Tracking Mode

SMS with command "WKMD,0#"

Location updates automatically every 3 minutes and the battery will run out faster.

Power Saving Mode

SMS with command "WKMD,1#" (mode default)

Status with movement: The device will automatically update the latest location every 3 minutes.

Status without movement: The device will not automatically update the latest location and only displays the last position presence.

Sleep Mode

SMS with command "WKMD,2#"

To save the battery, the device will not update the location. The device will send heartbeat data every 10 minutes, then temporarily disconnect from the app.

* Recommendation: To save the battery and longer standy, switch to Sleep Mode so the user can get the location information through Secumore1 app or send SMS command "GPSON,5#" to activate GPS tracking for 5 minutes for emergency purposes.

GPS Activation in Fixed Time

This feature is used to activate the GPS within a certain period of time. For example, when sending SMS command "GPSON,5#", the device will update the location every 30 seconds for 5 minutes. After 5 minutes, the device will return to the default working mode. Selectable timeframe between 1-100 (in seconds).

Voice Listen

In default, this feature is disabled. To enable this feature, users need to set the caller or GPS owner (main) number first.

Send SMS "JT,1#" to activate the Voice Listen feature, then use the admin number (main number) to call the SIM card number installed on the device. The device will pick up the call automatically, and the user can hear the sound around the device.

Send SMS "JT,0#" to deactivate the Voice Listen feature.

If the admin number is not registered, the device will not be able to receive incoming calls and answer automatically.

Voice Record (Only Use with Secumore1 App)

Check voice recordings using commands on the app by clicking the Voice Recording button. This feature takes about 1-3 minutes to load the voice recording into the app and then the user will be able to hear the files.

Indoor Tracking via LBS

LBS is designed for indoor tracking, so it only shows the closest location which is less accurate. In default, this feature is disabled.

Send SMS "LBS,1#" to activate LBS, and send SMS "LBS,0#" to deactivate LBS.

SMS Command List

Step 1: Set APN

APN,SIMCardAPN,APNName,APNPassword#

Example:

APN,telkomsel,wap,wap123#

APN,internet,,#

APN,m2minternet,,#

APN,indosatgprs,indosat,indosat#

APN,www.xlgprs.net,xlgprs,proxl#

APN,3data,3data,3data#

APN,AXIS,axis,123456#

Step 2: Set IP Port

IP,www.gps228.com,8989#

No need to send this SMS command if you use Secumore1 app.

Get Google Maps Location Link

WHERE#

Check Device Settings

PARAM#

Set Time Interval (in Seconds)

TIMER,20#

Set Admin Number (Main Number) to Receive Alarm Alerts

CENTER,A,phone#

No need to include the country code.

Example:

CENTER,A,085212345678#

Low Battery Alert Alarm (Active in Default)

Feature activation SMS: BATALM,1#

Feature deactivation SMS: BATALM,0#

Device Reset

RESET#

Back to Factory Settings

FACTORY#

This SMS will erase all settings and restore settings to factory settings.

* Note: Please make sure that the SMS format used is correct. Any kind of error in the SMS format will cause configuration failure and no response from the device.