SETTINGS SMS gf10
description of lights on device
GSM signal light: (Working) The light flashes once, then the light is off; (Not Working) The light is still blinking which means it doesn't read the SIM card properties.
Charging status light (Charging): (Working) The light is constantly on which means it is fully charged; (Not Working) Flashing light which means it is still charging.
️Poweron/off
Insert 2G GSM SIMcard(micro size) with active GPRS data service.
When inserting the SIM card, the device will turn on automatically, and if you remove the SIMcardthen the device will turn off.
The device supports three working modes
It is recommended to switch the working mode through the application.
-
Modereal-time tracking:SMS with command "WKMD,0#"
The updated location automatically every 3 minutes and the battery will drain faster.
-
Power saving mode (power saving mode):SMS with command "WKMD,1#" (mode default)
Status with movement: Lokasi updated auto every 3 minutes.
Status without movement: The device will not automatically update latest location and displays only the last position present.
-
Sleep mode (sleep mode):SMS with command "WKMD,2#"
Device will not update location to save battery. The device will send heartbeat data every 10 minutes, then disconnect from the application.
* Recommendation:
To save battery and standby longer, switch to Sleep Mode so that users can get location information through the application or send SMS "GPSON,5#" to activate GPS tracking for 5 minutes for emergency purposes .
fixed time gps activation (fix time)
This feature is used with activated GPS for a certain period of time. When sending SMS command "GPSON,5#", the device willupdates location every 30 seconds for 5 minutes. After 5 minutes, the device will return to the default working mode. Selectable time period between 1-100 (in seconds).
voice listen/tap
By default, this feature is not enabled. To activate this feature, it is necessary to set the middle number (center number) terlalu.
Send SMS "JT,1#", then use the middle number (center number) to call the device's mobile number. The device will pick up the call automatically, and the user can hear the sound around the device.
Send SMS "JT,0#" to cancel Voice Listen/Tapping.
record sound (only with app)
Check the voice recording using the commands in the application by clicking the "Voice Recording" button. This feature takes about 1-3 minutes to finish loading the voice recording into the app and then the user will be able to hear the sound replay.
indoor tracking (indoor) via lbs
LBS is designed for indoor tracking (indoor tracking), so it only shows the closest location which is less accurate. By default, this feature is not enabled.
Send SMS "LBS,1#" to activate LBS, and send SMS "LBS,0#" to deactivate LBS.
SMS Command List:
Step 1: Set APN
APN, SIMCardAPN,APNName,APNPassword#
Example:
APN, Telkomsel#
Contact GSM Operator for information about your APN.
Step 2: Set IP Port
IP,www.gps228.com,8989#
This setting is only used for different tracker apps.
Get Google link SMS
WHERE#
Check device settings
PARAM#
Set time interval (in seconds)
TIMER,20#
Set the center number to receive the alarm
CENTER,A,phone#
No need to include country code.
Low battery warning alarm (on by default)
Feature activation SMS: CANCEL,1#
Feature deactivation SMS: CANCEL,0#
Setting back on the device (reset)
RESET#
back to factory settings
FACTORY#
This SMS will erase all settings and restore settings to factory settings.
* Notes:
An error in the format of the SMS command will cause it to fail and there will be no reply.
GPS web portaltracking
Website: www.secumore1818.com
Applications available for Android and IOS under the names:secumore1
Default IMEI as username; password: 123456
Change the license plate number through the application by:
-
Click "More" >> Click "Device Info" >> Click "License Plate"
-
You can change username to replace IMEI as username
